345
10.1 Specifications
*1 Equivalent to 200 m of our E paper
*2 It is encouraged to use paper recommended by Xerox. Printing may not be performed correctly depending on the use conditions.
Copy media
*2
Roll paper feed
Plain paper : 60 - 110 g/m
2
Tracing paper : 90 - 112 g/m
2
Film : 75 - 100 um
Manual feed
Plain paper : 60 - 110 g/m
2
Tracing paper : 90 - 112 g/m
2
Film : 75 - 100 um
Image loss width
Roll paper
When outside diameter of the roll is 100 mm or more: Lead edge 5 mm or less, Trail edge
5 mm or less, Right&Left 5 mm or less
When outside diameter of the roll is less than 100 mm: Lead edge 8 mm or less, Trail
edge 8 mm or less, Right&Left 5 mm or less
Cut sheet: Lead edge 5 mm or less, Trail edge 5 mm or less, Right&Left 5 mm or less
Power source
AC 220 - 240 V, -10 to 6%, 10A for both 50/60 Hz
Power consumption
Maximum: 1.5kW
Sleep mode: 13W
Warm-up time
135 seconds or less (when the room temperature is at 22ºC and the humidity is at 55%)
Dimensions
Width 1,410 x depth 710 x height 1,420 mm (with the control panel)
Width 1,310 x depth 710 x height 1,160 mm (without the control panel)
Floor space
Standard configuration
Width 1,310 x depth 710 mm
When the original stock flat tray is installed:
Width 1,310 x depth 1,510 mm
Weight
260 kg
The weight is without any toner and paper.
Item Description