Before Using the Machine
1
63
1.11 Cleaning the Machine
3.
Wipe the white reflection plate on the back of the document
cover with a dried cloth.
4.
Wipe the surface of the scanning glass with a dried cloth.
Do not use excessive force on the glass, it may result in
malfunctions or physical damage.
5.
Wipe the document feed path with a dried cloth.
Do not wipe the roller. Oil on the roller can adhere to the
document feed path, and this may causing originals to slip on the path during feeding.
6.
Put the document cover back to the original position.
If streaks appear on the
prints,
wipe the reflection plate.
If spots appear on the
prints,
wipe the surface of the
scanning glass.
If streaks appear on the
prints,
wipe the document feed
path.
To Next Page
Loading...
Need help?
General