Xerox WorkCentre 5020 - Print Feature and System Specifications

July, 2007
4-49
WorkCentre 5020
REP 8.1.1
Repairs and Adjustments
Initial Issue
6. Remove the AIOC PWB (Figure 5)
1 Remove the screws (2).
2 Remove the Tapping Screws (2).
3 Slide the the AIOC PWB up and out of P/J 407.
Figure 5
Replacement
1. To install, do the removal steps in reverse order.
2. When replacing the AIOC PWB, transfer the EP ROM (U2) from the old board to the new
one (Figure 6).
A EP ROM (U2)
Figure 6