Xerox WorkCentre 5020 - General Troubleshooting Table; Troubleshooting Common Symptoms

July, 2007
4-26
WorkCentre 5020
REP 4.3.1
Initial Issue
Repairs and Adjustments
Replacement
1. To install, do the removal steps in reverse order.
2. Perform the following steps to install the Corotron Block (Figure 5).
1 Press the Spring Plate.
2 Install the Corotron Block.
Figure 5
3. Attach the cables (Ground/Detack/Transfer) to the Corotron Block hooks as shown in Fig-
ure 6.
Figure 6