2.1
Model System Startup Procedure
2-35
3.
Change confirmation dialog box will be displayed. Click the Yes Button to return to the
Controller Running Status Dialog Box. Check that the RUN LED indicator is lit.
4.
Click the CLOSE Button in the Controller Running Status Dialog Box to exit RUN
settings.
( 9 ) Logging Off
Log off once the work using MPE720 (Embedded) has been completed.
1.
Right-click on the Controller Folder where sample programs are saved and select Log
Off from the pop-up menu that is displayed.
2.
Click the Yes Button in the displayed dialog box to complete the logoff process.
To Next Page
Loading...
