YASKAWA NX100 Instructions

Index-4
V
variable...................................................... 12-4
variable type
............................................... 12-4
W
WAGO connector....................................... 13-12
WEAVING PROHIBITED
............................ 13-42
WELD COMPLETION
................................ 13-60
WELD CONDITION
.................................... 13-62
WELD ERROR RESET
.............................. 13-62
WELD ON/OFF
.......................................... 13-62
WELDING COMMAND
............................... 13-62
WELDING ERROR
.................................... 13-61
WELDING ON/OFF (from sequencer)
.......... 13-60
WELDING PAUSE (from sequencer)
........... 13-60
window allocation
........................................ 8-93
WIRE SHORTAGE (MONITOR)
.................. 13-43
WIRE STICKING (MONITOR)
..................... 13-43
WORK COMMAND
.................................... 13-55
work home position
..................................... 8-47
work home position cube length of its sides
... 8-48
WORK PROHIBITED (arc generation prohibited)
...
13-42
WORK RESPONSE (pseudo arc ON response)
13-
42
X
XX............................................................. 8-70
XY
............................................................. 8-70

YASKAWA NX100 Specifications

General

Manufacturer	YASKAWA
Model	NX100
Operating Temperature	0 to 45°C
Humidity	20 to 80% RH (non-condensing)
Communication Interfaces	Ethernet
Safety Standards	ISO 10218-1
Power Supply	200-230V AC, 50/60Hz
Storage Temperature	60°C