Deliver in – set the time limit for delivering an e-mail to an inaccessible SMTP
server.
Click to send a testing e-mail to the defined address with the aim to test Apply & Test
the functionality of the current e-mail sending setting. Enter the destination e-mail
address into the Test e-mail address field and press the button. The current e-mail
sending state is continuously displayed in the window for you to detect an e-mail
One camera shot setting problem if any on the intercom or another network element.
is always attached to the e-mail even in cameraless models where the image is sent
with N/A.
To Next Page
Loading...
