112 CHAPTER 7: PHY DIAGNOSTICS COMMANDS
Console#
show fiber-ports optical-transceiver 21 detailed
Current Output
Port Temp Voltage Power Power Input LOS
[C] [Volt] [mA] [mWatt] [mWatt]
---- ---- ------- ------- ------ ----- -------
21 34 3.35 8.43 2.72 7.71 No
Temp – Internally measured transceiver temperature.
Voltage - Internally measured supply voltage.
Current – Measured TX bias current.
Output Power – Measured TX output power in milliWatts.
Input Power – Measured RX received power in milliWatts.
LOS – Loss of signal
N/A - Not Available, N/S - Not Supported, W - Warning, E - Error
To Next Page
Loading...
