HA-8190V 1-27
1.4 Installation
6 Place the eluent packs and hemolysis washing solution bottle in the specified
positions.
a Neatly arrange tubes and fluid level detection sensor cord to
prevent twisting or tangling.
b Place the eluent packs on the bottle tray.
• Position the packs as shown on the right.
c Shape the eluent packs into a smooth standing position.
d Place the hemolysis washing solution bottle on the right side of
the instrument.
Hemolysis
washing
solution
Eluent CV
Eluent Β
Eluent Α
NOTE:
Set the packs each between the applicable pack supporters.
NOTE:
Eluent may not be fully aspirated if the pack is bent over or
collapses during measurement.
To Next Page
Loading...
