AudioCodes Mediant 500L MSBR

User's Manual 1004 Document #: LTRT-10466
Mediant 500L MSBR
Parameter Description
Web: Destination Phone
Number Manipulation
Table for Tel > IP Calls
EMS: SIP Manipulations >
Destination Telcom to IPs
CLI: configure voip > gw
manipulations
NumberMapTel2Ip
[NumberMapTel2IP]
This table parameter manipulates the destination number of Tel-to-IP
calls. The format of the ini file table parameter is as follows:
[NumberMapTel2Ip]
FORMAT NumberMapTel2Ip_Index =
NumberMapTel2Ip_ManipulationName,
NumberMapTel2Ip_DestinationPrefix, NumberMapTel2Ip_SourcePrefix,
NumberMapTel2Ip_SourceAddress, NumberMapTel2Ip_NumberType,
NumberMapTel2Ip_NumberPlan, NumberMapTel2Ip_RemoveFromLeft,
NumberMapTel2Ip_RemoveFromRight,
NumberMapTel2Ip_LeaveFromRight, NumberMapTel2Ip_Prefix2Add,
NumberMapTel2Ip_Suffix2Add,
NumberMapTel2Ip_IsPresentationRestricted,
NumberMapTel2Ip_SrcTrunkGroupID, NumberMapTel2Ip_
SrcIPGroupID;
[\NumberMapTel2Ip]
For a detailed description of this table, see ''Configuring
Source/Destination Number Manipulation'' on page 381.
Source Phone Number Manipulation for IP-to-Tel Calls Table
Web: Source Phone
Number Manipulation
Table for IP > Tel Calls
EMS: SIP Manipulations >
Source IP to Telcom
CLI: configure voip > gw
manipulations
SourceNumberMapIp2Tel
[SourceNumberMapIP2T
el]
This parameter table manipulates the source number for IP-to-Tel calls.
The format of the ini file table parameter is as follows:
[SourceNumberMapIp2Tel]
FORMAT SourceNumberMapIp2Tel_Index =
SourceNumberMapIp2Tel_ManipulationName,
SourceNumberMapIp2Tel_DestinationPrefix,
SourceNumberMapIp2Tel_SourcePrefix,
SourceNumberMapIp2Tel_SourceAddress,
SourceNumberMapIp2Tel_NumberType,
SourceNumberMapIp2Tel_NumberPlan,
SourceNumberMapIp2Tel_RemoveFromLeft,
SourceNumberMapIp2Tel_RemoveFromRight,
SourceNumberMapIp2Tel_LeaveFromRight,
SourceNumberMapIp2Tel_Prefix2Add,
SourceNumberMapIp2Tel_Suffix2Add,
SourceNumberMapIp2Tel_IsPresentationRestricted;
[\SourceNumberMapIp2Tel]
For a detailed description of this table, see ''Configuring
Source/Destination Number Manipulation'' on page 381.
EMS: Perform Additional
IP2TEL Source
Manipulation
CLI: prfm-ip-to-tel-src-map
[PerformAdditionalIP2TE
LSourceManipulation]
Enables additional source number manipulation for IP-to-Tel calls. The
additional manipulation is done on the initially manipulated source
number, and this additional rule is also configured in the manipulation
table (SourceNumberMapIP2Tel parameter). This enables you to
configure only a few manipulation rules for complex number
manipulation requirements (that generally require many rules).
 [0] = Disable (default)

[1]
= Enable
Source Phone Number Manipulation for Tel-to-IP Calls Table
Web: Source Phone
Number Manipulation
Table for Tel > IP Calls
EMS: SIP Manipulations >
Source Telcom to IP
CLI: configure voip > gw
manipulations
This table parameter manipulates the source phone number for Tel-to-
IP calls. The format of the ini file table parameter is as follows:
[SourceNumberMapTel2Ip]
FORMAT SourceNumberMapTel2Ip_Index =
SourceNumberMapTel2Ip_ManipulationName,
SourceNumberMapTel2Ip_DestinationPrefix,