AudioCodes Mediant 500L MSBR

User's Manual 67. Configuration Parameters Reference
Version 6.8 1003 Mediant 500L MSBR
Parameter Description
CallingNameMapIp2Tel_RemoveFromRight,
CallingNameMapIp2Tel_LeaveFromRight,
CallingNameMapIp2Tel_Prefix2Add,
CallingNameMapIp2Tel_Suffix2Add;
[ \CallingNameMapIp2Tel ]
For a detailed description of this table, see ''Configuring SIP Calling
Name Manipulation'' on page 388.
Calling Name Manipulations Tel-to-IP Table
CLI: configure voip > gw
manipulations calling-
name-map-tel2ip
[CallingNameMapTel2Ip]
This table parameter configures rules for manipulating the calling name
(caller ID) for Tel-to-IP calls. This can include modifying or removing the
calling name.
[ CallingNameMapTel2Ip ]
FORMAT CallingNameMapTel2Ip_Index =
CallingNameMapTel2Ip_ManipulationName,
CallingNameMapTel2Ip_DestinationPrefix,
CallingNameMapTel2Ip_SourcePrefix,
CallingNameMapTel2Ip_CallingNamePrefix,
CallingNameMapTel2Ip_SrcTrunkGroupID,
CallingNameMapTel2Ip_SrcIPGroupID,
CallingNameMapTel2Ip_RemoveFromLeft,
CallingNameMapTel2Ip_RemoveFromRight,
CallingNameMapTel2Ip_LeaveFromRight,
CallingNameMapTel2Ip_Prefix2Add,
CallingNameMapTel2Ip_Suffix2Add;
[ \CallingNameMapTel2Ip ]
For a detailed description of this table, see ''Configuring SIP Calling
Name Manipulation'' on page 388.
Destination Phone Number Manipulation for IP-to-Tel Calls Table
Web: Destination Phone
Number Manipulation
Table for IP > Tel Calls
EMS: SIP Manipulations >
Destination IP to Telcom
CLI: configure voip > gw
manipulations
NumberMapIp2Tel2
[NumberMapIP2Tel]
This table parameter manipulates the destination number of IP-to-Tel
calls. The format of the ini file table parameter is as follows:
[NumberMapIp2Tel]
FORMAT NumberMapIp2Tel_Index =
NumberMapIp2Tel_ManipulationName,
NumberMapIp2Tel_DestinationPrefix, NumberMapIp2Tel_SourcePrefix,
NumberMapIp2Tel_SourceAddress, NumberMapIp2Tel_NumberType,
NumberMapIp2Tel_NumberPlan, NumberMapIp2Tel_RemoveFromLeft,
NumberMapIp2Tel_RemoveFromRight,
NumberMapIp2Tel_LeaveFromRight, NumberMapIp2Tel_Prefix2Add,
NumberMapIp2Tel_Suffix2Add,
NumberMapIp2Tel_IsPresentationRestricted;
[\NumberMapIp2Tel]
For a detailed description of this table, see ''Configuring
Source/Destination Number Manipulation'' on page 381.
EMS: Perform Additional
IP2TEL Destination
Manipulation
CLI: prfm-ip-to-tel-dst-map
[PerformAdditionalIP2TE
LDestinationManipulatio
n]
Enables additional destination number manipulation for IP-to-Tel calls.
The additional manipulation is done on the initially manipulated
destination number, and this additional rule is also configured in the
manipulation table (NumberMapIP2Tel parameter). This enables you to
configure only a few manipulation rules for complex number
manipulation requirements (that generally require many rules).
 [0] = Disable (default)
 [1] = Enable
Destination Phone Number Manipulation for Tel-to-IP Calls Table