AudioCodes Mediant 500L MSBR

User's Manual 67. Configuration Parameters Reference
Version 6.8 1031 Mediant 500L MSBR
Parameter Description
LDAP Cache Service
CLI: cache
[LDAPCacheEnable]
Enables the LDAP cache service.
 [0] Disable (default)
 [1] Enable
Notes:
 For this parameter to take effect, a device reset is
required.
 For more information on LDAP caching, see
''Configuring the Device's LDAP Cache'' on page 235.
LDAP Cache Entry Timeout
CLI: entry-timeout
[LDAPCacheEntryTimeout]
Defines the duration (in minutes) that an entry in the LDAP
cache is valid. If the timeout expires, the cached entry is
only used if there is no connectivity with the LDAP server.
The default is 1200.
LDAP Cache Entry Removal Timeout
CLI: entry-removal-timemout
[LDAPCacheEntryRemovalTimeout]
Defines the duration (in hours) after which the LDAP entry
is removed from the cache.
The default is 0.
LDAP Configuration Table
Web: LDAP Configuration Table
CLI: configure voip > ldap > ldap-
configuration
[LdapConfiguration]
Defines the LDAP servers.
[ LdapConfiguration ]
FORMAT LdapConfiguration_Index =
LdapConfiguration_LdapConfServerIp,
LdapConfiguration_LdapConfServerPort,
LdapConfiguration_LdapConfServerMaxRespondTime,
LdapConfiguration_LdapConfServerDomainName,
LdapConfiguration_LdapConfPassword,
LdapConfiguration_LdapConfBindDn,
LdapConfiguration_LdapConfInterfaceType,
LdapConfiguration_Type,
LdapConfiguration_MngmAuthAtt,
LdapConfiguration_ConnectionStatus;
[ \LdapConfiguration ]
For a detailed description of this table, see ''Configuring
LDAP Servers'' on page 228.
LDAP Server Search DN Table
Web: LDAP Search DN Table
CLI: configure voip > ldap > ldap-
servers-search-dns
[LdapServersSearchDNs]
Defines the full base path (i.e., distinguished name / DN)
to the objects in the AD where the query is done, per
LDAP server.
[ LdapServersSearchDNs ]
FORMAT LdapServersSearchDNs_Index =
LdapServersSearchDNs_Base_Path,
LdapServersSearchDNs_LdapConfigurationIndex,
LdapServersSearchDNs_SearchDnInternalIndex;
[ \LdapServersSearchDNs ]
For a detailed description of this table, see ''Configuring
LDAP DNs (Base Paths) per LDAP Server'' on page 231.