User's Manual 29. Configuring Supplementary Services
Version 6.8 477 Mediant 500L MSBR
The following procedure describes how to configure the Supplementary Services table in
the Web interface. You can also configure this table using the table ini file parameter,
ISDNSuppServ or CLI command, configure voip > gw digitalgw isdn-supp-serv.
To configure endpoint supplementary services:
1. Open the Supplementary Services Table page (Configuration tab > VoIP menu >
GW and IP to IP > DTMF and Supplementary > Supp Services Table).
2. Click Add; the following dialog box appears:
Figure 29-10: Supplementary Services Table - Add Record
To Next Page
Loading...
