User's Manual 558 Document #: LTRT-10466
Mediant 500L MSBR
The flowchart below illustrates the classification process:
Figure 36-1: Classification Process (Identifying IP Group or Rejecting Call)
Note:
The device saves incoming SIP REGISTER messages in its registration
database. If the REGISTER message is received from a User-type IP Group, the
device sends the message to the configured destination.
The following procedure describes how to configure Classification rules in the Web
interface. You can also configure Classification rules using the table ini file parameter,
Classification or CLI command, configure voip > sbc routing classification.
To Next Page
Loading...
