User's Manual 580 Document #: LTRT-10466
Mediant 500L MSBR
Parameter Description
Operation Rule - Action
Remove From Left
CLI: remove-from-left
[IPInboundManipulation_Rem
oveFromLeft]
Defines the number of digits to remove from the left of the user
name prefix. For example, if you enter 3 and the user name is
"john", the new user name is "n".
Remove From Right
CLI: remove-from-right
[IPInboundManipulation_Rem
oveFromRight]
Defines the number of digits to remove from the right of the user
name prefix. For example, if you enter 3 and the user name is
"john", the new user name is "j".
Note: If both 'Remove From Right' and 'Leave From Right'
parameters are configured, the 'Remove From Right' setting is
applied first.
Leave From Right
CLI: leave-from-right
[IPInboundManipulation_Leav
eFromRight]
Defines the number of characters that you want retained from the
right of the user name.
Note: If both 'Remove From Right' and 'Leave From Right'
parameters are configured, the 'Remove From Right' setting is
applied first.
Prefix to Add
CLI: prefix-to-add
[IPInboundManipulation_Prefi
x2Add]
Defines the number or string that you want added to the front of the
user name. For example, if you enter 'user' and the user name is
"john", the new user name is "userjohn".
Suffix to Add
CLI: suffix-to-add
[IPInboundManipulation_Suffi
x2Add]
Defines the number or string that you want added to the end of the
user name. For example, if you enter '01' and the user name is
"john", the new user name is "john01".
To Next Page
Loading...
