AudioCodes Mediant 500L MSBR

User's Manual 584 Document #: LTRT-10466
Mediant 500L MSBR
Parameter Description
[IPOutboundManipulation_ReRout
eIPGroupID]
typically used for re-routing requests (e.g., INVITEs) when
interworking is required for SIP 3xx redirect responses or
REFER messages.
The default is -1 (i.e., not configured).
Notes:
 This parameter functions together with the 'Call Trigger'
parameter (see below).
 For more information on interworking of SIP 3xx redirect
responses or REFER messages, see ''
Interworking SIP 3xx
Redirect Responses'' on page 526 and ''Interworking SIP
REFER Messages'' on page 529, respectively.
Call Trigger
CLI: trigger
[IPOutboundManipulation_Trigger
]
Defines the reason (i.e., trigger) for the re-routing of the SIP
request:
 [0] Any = (Default) Re-routed for all scenarios (re-routes
and non-re-routes).
 [1] 3xx = Re-routed if it triggered as a result of a SIP 3xx
response.
 [2] REFER = Re-routed if it triggered as a result of a
REFER request.
 [3] 3xx or REFER = Applies to options [1] and [2].
 [4] Initial only = Regular requests that the device forwards
to a destination. In other words, re-routing of requests
triggered by the receipt of REFER or 3xx does not apply.
Operation Manipulation Rule - Action
Manipulated Item
CLI: manipulated-uri
[IPOutboundManipulation_IsAddit
ionalManipulation]
Defines the element in the SIP message that you want
manipulated.
 [0] Source URI = (Default) Manipulates the source SIP
Request-URI user part.
 [1] Destination URI = Manipulates the destination SIP
Request-URI user part.
 [2] Calling Name = Manipulates the calling name in the SIP
message.
Remove From Left
CLI: remove-from-left
[IPOutboundManipulation_Remov
eFromLeft]
Defines the number of digits to remove from the left of the
manipulated item prefix. For example, if you enter 3 and the
user name is "john", the new user name is "n".
Remove From Right
CLI: remove-from-right
[IPOutboundManipulation_Remov
eFromRight]
Defines the number of digits to remove from the right of the
manipulated item prefix. For example, if you enter 3 and the
user name is "john", the new user name is "j".
Leave From Right
CLI: leave-from-right
[IPOutboundManipulation_LeaveF
romRight]
Defines the number of digits to keep from the right of the
manipulated item.