User's Manual 642 Document #: LTRT-10466
Mediant 500L MSBR
To load files using the Software Upgrade Wizard:
1. Make sure that you have installed a new Software License Key (see Installing the
Software License Key on page 638) that is compatible with the software version to be
installed.
2. It is recommended to enable the Graceful Lock feature (see Locking and Unlocking
the Device on page 605). The wizard resets the device at the end of the upgrade
process, thereby causing current calls to be untimely terminated. To minimize this
traffic disruption, the Graceful Lock feature prevents the establishment of new calls.
3. It is recommended to save a copy of the device's configuration to your computer. If an
upgrade failure occurs, you can restore your configuration settings by uploading the
backup file to the device. For saving and restoring configuration, see Backing Up and
Loading Configuration File on page 646).
4. Open the Software Upgrade wizard, by performing one of the following:
• Select the Maintenance tab, click the Software Update menu, and then click
Software Upgrade Wizard.
• On the toolbar, click Device Actions, and then choose Software Upgrade
Wizard.
Figure 46-6: Start Software Upgrade Wizard Screen
5. Click Start Software Upgrade; the wizard starts, prompting you to load a .cmp file:
Figure 46-7: Software Upgrade Wizard - Load CMP File
To Next Page
Loading...
