AudioCodes Mediant 500L MSBR

User's Manual 67. Configuration Parameters Reference
Version 6.8 787 Mediant 500L MSBR
Parameter Description
Web: Trap Manager Host Name
CLI: manager-host-name
[SNMPTrapManagerHostName]
Defines an FQDN of the remote host used as an SNMP
manager. The resolved IP address replaces the last entry in
the Trap Manager table (defined by the
SNMPManagerTableIP parameter) and the last trap
manager entry of snmpTargetAddrTable in the
snmpTargetMIB. For example: 'mngr.corp.mycompany.com'.
The valid range is a string of up to 99 characters.
SNMP Community String Parameters
Community String - Read Only
configure system > snmp > ro-
community-string
[SNMPReadOnlyCommunityString_
x]
Defines a read-only SNMP community string. Up to five
read-only community strings can be configured.
The valid value is a string of up to 19 characters that can
include only the following:
 Upper- and lower-case letters (a to z, and A to Z)
 Numbers (0 to 9)
 Hyphen (-)
 Underline (_)
For example, "Public-comm_string1".
The default is "public".
Community String - Read / Write
configure system > snmp > rw-
community-string
[SNMPReadWriteCommunityString_
x]
Defines a read-write SNMP community string. Up to five
read-write community strings can be configured.
The valid value is a string of up to 19 characters that can
include only the following:
 Upper- and lower-case letters (a to z, and A to Z)
 Numbers (0 to 9)
 Hyphen (-)
 Underline (_)
For example, "Private-comm_string1".
The default is "private".
Trap Community String
configure system > snmp trap >
community-string
[SNMPTrapCommunityString]
Defines the community string for SNMP traps.
The valid value is a string of up to 19 characters that can
include only the following:
 Upper- and lower-case letters (a to z, and A to Z)
 Numbers (0 to 9)
 Hyphen (-)
 Underline (_)
For example, "Trap-comm_string1".
The default is "trapuser".
SNMP Trusted Managers Table
Web: SNMP Trusted Managers
CLI: configure system > snmp >
trusted-managers
[SNMPTrustedMgr_x]
Defines up to five IP addresses of remote trusted SNMP
managers from which the SNMP agent accepts and
processes SNMP Get and Set requests.
Notes:
 By default, the SNMP agent accepts SNMP Get and Set
requests from any IP address, as long as the correct
community string is used in the request. Security can be
enhanced by using Trusted Managers, which is an IP
address from which the SNMP agent accepts and
processes SNMP requests.