AudioCodes Mediant 500L MSBR

User's Manual 67. Configuration Parameters Reference
Version 6.8 811 Mediant 500L MSBR
Parameter Description
interface for OAMP.
CLI: isdn-facility-trace
[FacilityTrace]
Enables ISDN traces of Facility I
nformation Elements (IE) for ISDN
call diagnostics. This allows you to trace all the parameters
contained in the Facility IE and view them in the Syslog.
 [0] Disable (default)
 [1] Enable
Note: For this feature to be functional, the GWDebugLevel
parameter must be enabled (i.e., set to at least level 1).
Web: Debug Recording
Destination IP
CLI: configure system > logging
> dbg-rec-dest-ip
[DebugRecordingDestIP]
Defines the IP address of the server for capturing debug recording.
Web: Debug Recording
Destination Port
CLI: configure system > logging
> dbg-rec-dest-port
[DebugRecordingDestPort]
Defines the UDP port of the server for capturing debug recording.
The default is 925.
Debug Recording Status
CLI: configure system > logging
> dbg-rec-status
[DebugRecordingStatus]
Activates or de-activates debug recording.
 [0] Stop (default)
 [1] Start
Web: Enable Core Dump
[EnableCoreDump]
Enables the automatic generation of a Core Dump file upon a
device crash.
 [0] Disable (disable)

[1]
Enable
Web: Core Dump Destination IP
[CoreDumpDestIP]
Defines the IP address of the remote server where you want the
device to send the Core Dump file.
By default, no IP address is defined.
Logging Filters Table
Web: Logging Filters Table
CLI: configure system > logging
> logging-filters
[LoggingFilters]
This table parameter defines logging filtering rules for Syslog
messages and debug recordings.
The format of the ini file table parameter is:
[ LoggingFilters ]
FORMAT LoggingFilters_Index = LoggingFilters_FilterType,
LoggingFilters_Value, LoggingFilters_Syslog,
LoggingFilters_CaptureType;
[ \LoggingFilters ]
For a detailed description of this table, see ''Filtering Syslog
Messages and Debug Recordings'' on page 741.