AudioCodes Mediant 500L MSBR

User's Manual 904 Document #: LTRT-10466
Mediant 500L MSBR
Parameter Description
Web: Forward on Do Not
Disturb Digit Pattern
(External)
EMS: VM Digit Pattern On
DND External
CLI: fwd-dnd-dig-ptrn-ext
[DigitPatternForwardOnDN
DExt]
Defines the digit pattern used by the PBX to indicate 'call forward on
do not disturb' when the original call is received from an external line
(not an internal extension).
The valid range is a 120-character string.
Web: Forward on No
Reason Digit Pattern
(External)
EMS: VM Digit Pattern No
Reason External
CLI: fwd-no-rsn-dig-ptrn-ext
[DigitPatternForwardNoRe
asonExt]
Defines the digit pattern used by the PBX to indicate 'call forward with
no reason' when the original call is received from an external line (not
an internal extension).
The valid range is a 120-character string.
Web: Internal Call Digit
Pattern
EMS: Digit Pattern Internal
Call
CLI: int-call-dig-ptrn
[DigitPatternInternalCall]
Defines the digit pattern used by the PBX to indicate an internal call.
The valid range is a 120-character string.
Web: External Call Digit
Pattern
EMS: Digit Pattern External
Call
CLI: ext-call-dig-ptrn
[DigitPatternExternalCall]
Defines the digit pattern used by the PBX to indicate an external call.
The valid range is a 120-character string.
Web: Disconnect Call Digit
Pattern
EMS: Tel Disconnect Code
CLI: disc-call-dig-ptrn
[TelDisconnectCode]
Defines a digit pattern that when received from the Tel side, indicates
the device to disconnect the call.
The valid range is a 25-character string.
Web: Digit To Ignore Digit
Pattern
EMS: Digit To Ignore
CLI: dig-to-ignore-dig-pattern
[DigitPatternDigitToIgnore]
Defines a digit pattern that if received as Src (S) or Redirect (R)
numbers is ignored and not added to that number.
The valid range is a 25-character string.