AudioCodes Mediant 500L MSBR

User's Manual 67. Configuration Parameters Reference
Version 6.8 903 Mediant 500L MSBR
Parameter Description
[MWIQsigMsgCentreldIDPar
tyNumber]
Defines the Message Centred ID party number used for QSIG MWI
messages. If not configured (default), the parameter is not included in
MWI (activate and deactivate) QSIG messages.
The valid value is a string.
Digit Patterns The following digit pattern parameters apply only to voice mail applications that use
the DTMF communication method. For the available pattern syntaxes, refer to the CPE Configuration
Guide for Voice Mail.
Web: Forward on Busy Digit
Pattern (Internal)
EMS: Digit Pattern Forward
On Busy
CLI: fwd-bsy-dig-ptrn-int
[DigitPatternForwardOnBu
sy]
Defines the digit pattern used by the PBX to indicate 'call forward on
busy' when the original call is received from an internal extension.
The valid range is a 120-character string.
Web: Forward on No Answer
Digit Pattern (Internal)
EMS: Digit Pattern Forward
On No Answer
CLI: fwd-no-ans-dig-pat-int
[DigitPatternForwardOnNo
Answer]
Defines the digit pattern used by the PBX to indicate 'call forward on
no answer' when the original call is received from an internal
extension.
The valid range is a 120-character string.
Web: Forward on Do Not
Disturb Digit Pattern
(Internal)
EMS: Digit Pattern Forward
On DND
CLI: fwd-dnd-dig-ptrn-int
[DigitPatternForwardOnDN
D]
Defines the digit pattern used by the PBX to indicate 'call forward on
do not disturb' when the original call is received from an internal
extension.
The valid range is a 120-character string.
Web: Forward on No
Reason Digit Pattern
(Internal)
EMS: Digit Pattern Forward
No Reason
CLI: fwd-no-rsn-dig-ptrn-int
[DigitPatternForwardNoRe
ason]
Defines the digit pattern used by the PBX to indicate 'call forward with
no reason' when the original call is received from an internal
extension.
The valid range is a 120-character string.
Web: Forward on Busy Digit
Pattern (External)
EMS: VM Digit Pattern On
Busy External
CLI: fwd-bsy-dig-ptrn-ext
[DigitPatternForwardOnBu
syExt]
Defines the digit pattern used by the PBX to indicate 'call forward on
busy' when the original call is received from an external line (not an
internal extension).
The valid range is a 120-character string.
Web: Forward on No Answer
Digit Pattern (External)
EMS: VM Digit Pattern On
No Answer Ext
CLI: fwd-no-ans-dig-pat-ext
[DigitPatternForwardOnNo
AnswerExt]
Defines the digit pattern used by the PBX to indicate 'call forward on
no answer' when the original call is received from an external line (not
an internal extension).
The valid range is a 120-character string.