User's Manual 980 Document #: LTRT-10466
Mediant 500L MSBR
Parameter Description
[KeyCFBusyOrNoAnswer]
Web: Do Not Disturb
EMS: CF Do Not Disturb
CLI: fwd-dnd
[KeyCFDoNotDisturb]
Defines the keypad sequence to activate the Do Not Disturb
option (immediately reject incoming calls).
To activate the required forward method from the telephone:
1 Dial the user-defined sequence number on the keypad; a dial tone is heard.
2 Dial the telephone number to which the call is forwarded (terminate the number with #); a
confirmation tone is heard.
Web: Forward Deactivate
EMS: Call Forward Deactivation
CLI: fwd-deactivate
[KeyCFDeact]
Defines the keypad sequence to deactivate any of the call
forward options. After the sequence is pressed, a confirmation
tone is heard.
Keypad Feature - Caller ID Restriction Parameters
Web: Restricted Caller ID Activate
EMS: CLIR
CLI: id-restriction-act
[KeyCLIR]
Defines the keypad sequence to activate the restricted
option. After the sequence is pressed, a confirmation tone is
heard.
Web: Restricted Caller ID
Deactivate
EMS: CLIR Deactivation
CLI: id-restriction-deact
[KeyCLIRDeact]
Defines the keypad sequence to deactivate the restricted Caller
ID option. After the sequence is pressed, a confirmation tone is
heard.
Keypad Feature - Hotline Parameters
Web: Hot-line Activate
EMS: Hot Line
CLI: hotline-act
[KeyHotLine]
Defines the keypad sequence to activate the delayed hotline
option.
To activate the delayed hotline option from the telephone,
perform the following:
1 Dial the user-defined sequence number on the keypad; a
dial tone is heard.
2 Dial the telephone number to which the phone automatically
dials after a configurable delay (terminate the number with
#); a confirmation tone is heard.
Web: Hot-line Deactivate
EMS: Hot Line Deactivation
CLI: hotline-deact
[KeyHotLineDeact]
Defines the keypad sequence to deactivate the delayed hotline
option. After the sequence is pressed, a confirmation tone is
heard.
Keypad Feature - Transfer Parameters
Note: See the description of the KeyBlindTransfer parameter for this feature.
Keypad Feature - Call Waiting Parameters
Web: Call Waiting Activate
EMS: Keypad Features CW
CLI: cw-act
[KeyCallWaiting]
Defines the keypad sequence to activate the Call Waiting
option. After the sequence is pressed, a confirmation tone is
heard.
To Next Page
Loading...
