AudioCodes Mediant 500L MSBR

User's Manual 67. Configuration Parameters Reference
Version 6.8 999 Mediant 500L MSBR
Parameter Description
Web: Send Screening
Indicator to ISDN
EMS: Screening Indicator
To ISDN
[ScreeningInd2ISDN]
Overrides the screening indicator of the calling party's number for IP-to-
Tel ISDN calls.
 [-1] Not Configured = (Default) Not configured (interworking from IP
to ISDN).
 [0] User Provided = user provided, not screened.
 [1] User Passed = user provided, verified and passed.
 [2] User Failed = user provided, verified and failed.
 [3] Network Provided = network provided
Note: This parameter is applicable only to digital PSTN interfaces
(ISDN).
Web: Copy Destination
Number to Redirect
Number
EMS: Copy Dest to
Redirect Number
CLI: cp-dst-nb-2-redir-nb
[CopyDest2RedirectNum
ber]
Enables the device to copy the received ISDN (digital interfaces) called
number to the outgoing SIP Diversion header for Tel-to-IP calls (even if
a Redirecting Number IE is not received in the ISDN Setup message,
for digital interfaces). Therefore, the called number is used as a redirect
number. Call redirection information is typically used for Unified
Messaging and voice mail services to identify the recipient of a
message.
 [0] Don't copy = (Default) Disable.
 [1] Copy after phone number manipulation = Copies the called
number after manipulation. The device first performs Tel-to-IP
destination phone number manipulation (i.e., on the SIP To header),
and only then copies the manipulated called number to the SIP
Diversion header for the Tel-to-
IP call. Therefore, with this option, the
called and redirect numbers are identical.
 [2] Copy before phone number manipulation = Copies the called
number before manipulation. The device first copies the original
called number to the SIP Diversion header, and then performs Tel-
to-IP destination phone number manipulation. Therefore, this allows
you to have different numbers for the called (i.e., SIP To header) and
redirect (i.e., SIP Diversion header) numbers.
Notes:
 For digital interfaces: If the incoming ISDN-to-IP call includes a
Redirect Number, this number is overridden by the new called
number if this parameter is set to [1] or [2].
 You can also use this feature for IP-to-Tel calls, by configuring this
parameter per IP Profile (IpProfile_CopyDest2RedirectNum). For
more information, see Configuring IP Profiles on page 332.