Barco SIM 7D - Display Setup

7. Advanced
7.8 Display setup
Overview
• Textbox
• Menu bar position
• Slider box position
• Sync variance limit
• Soft edge
• AutoImage Setup
• Smearing reduction (Optional)
•TMR
• Color temperature
• Dynacolor
• Gray Level Definition
• Convergence
7.8.1 Textbox
What can be done ?
The Text box function allows to choose whether the different text boxes are displayed or not.
How to enable/disable the Textbox ?
1. Press MENU to activate the Tool bar
2. Press → to select the Display setup item
3. Press ↓ to Pull down the Display setup menu
4. Use ↑ or ↓ to select Textbox
5. Press → to pull down the menu
6. Use ↓ or ↑ to enable (ON) or disable (OFF) the textbox
Image 7-85
7. Press ENTER
A white bullet shows the active setting
7.8.2 Menu bar position
What can be done ?
The menu tool bar can be centered vertically , the range being from top of the screen to the middle of the screen. This can be useful
in applications where the top image content is not displayed (soft edge region).
How to center the menu ?
1. Press MENU to activate the tool bar
R59770198 BARCO SIM 7D 13/02/2013
97