Barco SIM 7D - Enabling Dynacolor

7. Advanced
Image 7-131
Dynacolor sets
Depending on the projection mode, projector type, software version and availability of options, different Dynacolor sets can and will
be used (if the Dynacolor fe
ature is enabled):
• Standard Dynacolor set
• Dynacolor set with advanced color tracking through CLO
• Dynacolor set with advanced color tracking through NVG
Only the Standard Dynacolor set can be calibrated without the use of an additional device and software (XDS
RACU).
7.8.10.2 Enabling DynaColor
What can be done ?
Enabling the DynaColor will change the colors to the desired colors filled in the DynaColor menu. Disabling DynaColor will keep the
original colors determined by the source and the projector’s optical path.
124
R59770198 BARCO SIM 7D 13/02/2013