8. Maintenance
Image 8-4
X-cube filter cover: fixation screws
2. Lift the x-cube filter cover to remove it
Image 8-5
X-cube filter cover: lift to remove
3. Take out the x-cube filter
Image 8-6
X-cube filter: lift it to remove
Caution: Keep the air filter in horizontal position while moving it aw ay from the p rojector, so that no dust falls off.
Caution: Never put the air filter upside down! Always place it with the seal pointing to the surface where you place it.
8.3.2 Installing the x-cube filter
Necessary tools
Torx screwdriver T10
How to install the x-cube filter?
1. Place the x-cube filter in its housing
154
R59770198 BARCO SIM 7D 13/02/2013
To Next Page
