7. Advanced
Image 7-12
5. Press ENTER
A dialog box is displayed
Image 7-13
6. Use ↑ or ↓ to select the desired file
Tip: For more information (specifications) on the image files see the Appendix section
7. Press ENTER
The file is loaded and the image is adapted.
What to do if the image is not perfect ?
If the displayed image is not correct after Auto Image or after selecting the best fi tting file, go to the Edit menu, select the active file
and change the settings.
7.4.2 Auto Image
What can be done ?
Auto Image creates the best suited image file for the connected source.
It calculates/measures several source parameters :
• Total pixels per line
•Startpixel
•Phase
• Contrast/Brightness levels
Auto Image only works for data images.
The measure of the total number of pixels per line can be done through 2 methods
60
R59770198 BARCO SIM 7D 13/02/2013
To Next Page
