7. Advanced
How to display an Internal Pattern?
1. Press the MENU key to activate the Menu bar.
2. Push the cursor key ← or → to highlight Installation in the menu bar.
3. Push the ↓ keytopulldowntheInstallation menu.
4. Push the cursor key ↑ or ↓ to highlight Internal Pattern.
5. Push the → key to pull down the Internal Pattern menu.
6. Push the cursor key ↑ or ↓ to highlight the desired Internal Pattern
Image 7-172
7. Press ENTER to confirm
The Internal Pattern will be displayed.
8. Press BACK to return to the Installation menu.
7.9.8 Scaled Patterns
What can be done?
These Scaled Patterns can be used for measurement purposes, unlike the Internal Pattern, the Scaled Patterns will be distorted
according to the active Geometry File.
Available Scaled Patterns
Following pictures show the availab
le Scaled Patterns with an active zenith geometry fi le.
For all scaled patterns, the contribution of each of the primary colors can be set. The user interface to do so
is the same as the one which is used in the internal purity pattern.
146 R59770198 BARCO SIM 7D 13/02/2013