7. Advanced
Image 7-55
Transport Delay basic principle
The Transport delay can be adjusted manually or can be set to automatic.
A short Transport delay creates a small delay with respect to the source, but a large delay is needed in case extremely distorted
images are needed (extremely curved screens).
A delay set too short may introduce ’clipping’ phenomenons in the image.
How to set Transport Delay to manual or automatic ?
1. Start up the Geometry Edit menu
2. Push the cursor key ↑ or ↓ to highlight Transport Delay... and pre
ss ENTER to select.
Image 7-56
The Transport Delay dialog box will be displayed.
Image 7-57
3. Push the cursor key ↑ or ↓ to select the radio buttons
R59770198 BARCO SIM 7D 13/02/2013
83
To Next Page
Loading...
