Barco SIM 7D - Accessing the Geometry Menu; Geometry Distortions

7. Advanced
Available Geometry operations
• Load : loads an existing standard or custom geometry file
• Edit : allows to edit a custom geometry fi le
• Rename : allows to rename the geometry file
• Copy : allows to copy the geometry file
• Delete : allows to delete the geometry file
7.5.3 Accessing the Geometry menu
Geometry menu structure
The geometry menu consists out of the Left and R ight submenu. This allows the adjustment of the left and right frustum indepen-
dently from each other.
How to access the Geometry menu ?
1. Press MENU to activate the Tool bar
2. Press → to select Geometry
3. Press ↓ to Pull down the Geometry menu
4. Use↓or ↑ to select the Right or Left submenu
Note: The Right menu contains the same item s as the Left submenu
5. Press → to open the menu
Image 7-30
7.5.4 Geometry distortions
What can be done ?
The geometry adjustment of each frustum can be done in 33x33 regions that can be shifted to the desired location.
68
R59770198 BARCO SIM 7D 13/02/2013