Barco SIM 7D - Installing the Lamp Cover; Lamp Door: Fixation Screws; Lamp: Power Connector; Lamp Cover: Installing

8. Maintenance
Image 8-34
Lamp door: fixation screws
3. Plug in the power connector
Image 8-35
Lamp: power connector
8.4.6 Installing the lamp cover
Necessary tools
Torx screwdriver T10
Howtoinstallthelampcover?
1. Put the lamp cover on the right position
2. Move the lamp cover up and to the front side of the projector (1): the joggles must slide behind the side cover of the projector (2)
Image 8-36
Lamp cover: installing
3. Tighten the three screws
R59770198 BARCO SIM 7D 13/02/2013
163