7. Advanced
Image 7-126
The CIE chromaticity diagram
A projector can only reproduce a certain color gamut within this diagram. This color gamut is defined by the triangle formed by the
x, y coordinates of Red Green and Blue. These parameters are used by the DynaColor™ adjustment in the projector.
Image 7-127
The projector color gamut is defined by the triangle formed by the x, y coordinates of Red Green and Blue
Due to the tolerance on optical components the x, y values of this color gamut of each projector will differ.
Image 7-128
The color gamut of each projector will differ
When working with a multichannel setup, these color differences between different projectors can be smooth out by matching the
color gamuts of the different projectors to a Common Color Gamut.
R59770198 BARCO SIM 7D 13/02/2013
121