7. Advanced
It is recommended to use the default values.
Advanced settings for Digital Data sources (DVI)
The advanced button enables the advanced settings for digital data sources.
Image 7-18
UsePictureBox can be disabled (0) or enabled (1). By default, it is disabled which means that only few timings can be changed. In
case of a DVI source this is not a problem.
In very specific situations however (e.g. iBlend), more changes to the timings may be needed, such as the setting of the Start pixels,
Active p ixels, Start lines, Active lin es . In that case, hit Enter and change the slider to position 1, thus enabling more settings in the
Edit file menu.
Image 7-19
7.4.4 Save as (create a custom file)
Creating a custom file
When the loaded file is a standard file there is a possibility of sav
ing it as a custom file (= creating a custom file) , this is done with
the save as function. The saved file will always be a custom fi le (saved in the custom directory)
For sources that are often used, a custom file should be created. This custom file will then be loaded auto-
matically and will prevent the AutoImage from being launched.
How to save a file ?
1. Press MENU to activate the Tool bar
2. Press → to select the Image fi les item
3. Press ↓ to Pull down the Image files menu
4. Use ↑ or ↓ to select Save as...
Image 7-20
5. Press ENTER
A dialog box is displayed
Use ←or →, ↓ or ↑ the numeric keys on the remote, or the keypad to edit and change the file name, confirm with ENTER.
R59770198 BARCO SIM 7D 13/02/2013
63
To Next Page
Loading...
