Barco SIM 7D - 7.8.10 Dynacolor; 7.8.10.1 Introduction

7. Advanced
How to select a preset color temperature ?
1. Press MENU to activate the tool bar
2. Press → to select the Display setup item
3. Press ↓ to pull down the Display setup menu
4. Use ↑ or ↓ to select Color temperature
5. Press → to pull down the menu
6. Use ↓ or ↑ to select the desired preset color temperature
Image 7-125
7. Press ENTER
The color temperature of the image is adapted and a bullet shows the active setting.
How to set a custom color temperature ?
1. Change the coordinates of the white point in the Dynac
olor user interface
7.8.10 Dynacolor
Overview
• Introduction
• Enabling DynaColor
• Dynacolor adjustment
• Black color matching
• CLO-TOD color tracking
7.8.10.1 Introduction
What can be done?
DynaColor™ will eliminate channel-to-channel color variations or, in case of a single projector, force a desired color reproduction.
How to define color?
The CIE chromaticity diagram is one way to plot t
he colors the human eye can see.
120
R59770198 BARCO SIM 7D 13/02/2013