Barco SIM 7D - Removing the X-Cube Filter; X-Cube Air Filter (Thicker Seal); Electronics Air Filter (Thinner Seal)

8. Maintenance
• x–cube air filter: filter with a thicker seal
Image 8-2
x-cube air filter (thicker seal)
• electronics air filter: filter with a thinner seal
Image 8-3
electronics air filter (thinner seal)
Overview
• Removing the x-cube filter
• Installing the x-cube filter
• Removing the electronics filter
• Installing the electronics filter
8.3.1 Removing the x-cube filter
Necessary tools
Torx screwdriver T10
How to remove the x-cube fi lter?
1. Loosen the four screws fixing the x-cube filter cover
Tip: These scre ws a re fixed to the x-cube filter c over and can not drop.
R59770198 BARCO SIM 7D 13/02/2013 153