Barco SIM 7D - Controls; Controls Overview

4. Installation
A dialog box is shown. The different executed operations are shown with a checkbox. The last operation Restarting network
takes a few seconds more.
Image 4-36
By default the Hostname for the master PMP (left frustum) consists out of an S followed by the serial number
of the projector and followed by A.
By default the Hostname for the slave PMP (right frustum) consists out of an S followed by the serial number
of the projector and followed by B.
4.8 Controls
4.8.1 Controls overview
RCU
The following table gives an overview of the different keys.
32
R59770198 BARCO SIM 7D 13/02/2013