7. Advanced
The Edit mode is selected
Image 7-49
2. Use ↑ and ↓ to select the PixelsX edit box
The PixelsX edit box is focused
3. Press ENTER
The PixelsX edit box is put in edit mode
Image 7-50
4. Use ← and → to select the digit and use ↑ and ↓ to increment/decrement the digit
Tip: O ne can also use the num eric digits to
fill in the desired value ?
The image is distorted along the X axis. Notice the unaffected regions.
7.5.6.5 Shift Adjustment
What can be done with the Shift adjustment ?
With the Shift adjustment it is
possible to shift the whole image. This is considered as a displacement of the 4 corner points of the
2x2 mode. The same dialog box is used as for the geometry edit.
How to use the Shift adjustment?
1. Start up the Geometry Edit menu
2. Press ↓ to select Shift ....
3. Press ENTER
80
R59770198 BARCO SIM 7D 13/02/2013
To Next Page
Loading...
