7. Advanced
Image 7-47
How to adjust using the Adjust mode ?
Adjusting point (row =0 ; column =0) by 100 (pixels) along the x axis in the 2x2 mode
1. Press ENTER to go to the A djust M ode
The A djust mode is selected
Image 7-48
2. Use ← and → to adapt the value of PixelsX
Tip: Use ↑ and ↓ to adap t the value of PixelsY
The image is distorted along the X axis. Notice the unaffected regions.
The adjustment is done in small steps. Adjusting for instance from 0 to 100 using the Adjust mode is not the
ideal method. The use of the Ed
it and Change mode is more appropriate.
How to adjust using the Edit and Change mode ?
Adjusting point (row =0 ; column =0) by 100 (pixels) along the x axis in the 2x2 mode
1. Press 2 times ENTER to go to the Ed it Mode
R59770198 BARCO SIM 7D 13/02/2013
79
To Next Page
Loading...
