5. Setup
Necessary tools
• Torx screwdriver T10
• Allen key 2 mm (hexadecimal key)
• Allen key 3 mm (hexadecimal key)
How to lock the lens holder?
1. Make sure the lens is in the correct position
2. Remove the top lens cover
Image 5-9
Lens top cover: fixing screws
3. Slide both fixation blocks for the horizontal shift away from each other until they hit the lens holder frame
Image 5-10
Horizontal shift: free
Image 5-11
Horizontal shift: blocked
4. Fix these blocks by tightening the front bolts
Image 5-12
Fixation screws for horizontal lens shift locking system
42 R59770198 BARCO SIM 7D 13/02/2013
To Next Page
Loading...
