Barco SIM 7D - Removing the Lamp Cover; Removing the Lamp Door; Lamp Cover Removal; Lamp: Power Connector

8. Maintenance
Overview
• Removing the lamp cover
• Removing the lamp door
• Removing the lamp
• Installing the lamp
• Installing the lamp door
• Installing the lamp cover
• Resetting the lamp runtime
8.4.1 Removing the lamp cover
Necessary tools
Torx screwdriver T10
How to remove the lamp cover?
1. Loosen the three fixation screws (1).
1
1
1
3
2
Image 8-19
Lamp cover removal
2. Slide the lamp cover to the rear side of the projector (2) and down (3) to release it
3. Remove the lamp cover
8.4.2 Removing the lamp door
Necessary tools
Torx screwdriver T10
How to remove the lamp door?
1. Unplug the lamp power connector
Image 8-20
Lamp: power connector
Image 8-21
Lamp: power connector unplugged
2. Loosen the three screws fixing the lamp door
Tip: These sc rews are no-loss screws and can not drop
R59770198 BARCO SIM 7D 13/02/2013
159