7. Advanced
A bullet shows the active setting
7.6.6.2 CLO Target
What must be done?
The light output target for the CLO is set in this menu. This value is forced on the projector provided the CLO has been set ON and
the target can be met.
The CLO target can be set in the range 200 .. 30000.
How to set the CLO target ?
1. Press MENU to activate the Tool bar
2. Press → to select the Lamps item
3. Press ↓ to pull down the Lamps menu
4. Use ↑ or ↓ to select CLO
5. Press → to pull down the menu
6. Use ↑ or ↓ to select Target ...
Image 7-80
7. Press ENTER
A dialog box is displayed
Image 7-81
8. Use ←or →, the numeric keys on the remote, or the keypad to change the target value.
7.7 General
Overview
•Pause
• Identification
7.7.1 Pause
Pause
The Pause function allows to interrupt the image display. The dimmer and lens opening are set to minimal position, the projector
remains with full power (lamp is on) for immediate restart.
R59770198 BARCO SIM 7D 13/02/2013
95
To Next Page
Loading...
Need help?
General
