7. Advanced
The alpha plane will only be applied if it has been activated in the Edit... menu’s dialog box (see procedure
above)
Howtoactivateanalphaplane?
1. Press the MENU key to activate the Tool bar.
2. Push the cursor key ← or → to highlight Display setup
3. Push the ↓ key to pull down the menu.
4. Push ↓or ↑ to select Soft edge
5. Push the → key to pull down the menu.
6. Push the cursor key ← or → to highlight Edit...
Image 7-109
7. Press ENTER
A dialog box will be displayed.
8. Use the arrows to select the A lpha planes check box and press ENTER
Image 7-110
Note: It takes some time for the alpha plane to be applied
R59770198 BARCO SIM 7D 13/02/2013
111
To Next Page
Loading...
