2. Packaging
CAUTION: Never transport the projector with the lens mounted on it !
Always remove the lens before transporting the projector.
CAUTION: Make sure that the projection lens has the one-to-one match with the projector and please contact
Barco in case of replacement of the projection lens.
How to unpack the projector ?
1. Release the cord straps.
PULL
TO OPE
Image 2-2
2. Remove the assembly from the pallet
3. Open the outer cardboard box
4. Remove the two smaller box, which contains:
- User guide and Safety manual
- RCU + batteries
- power cords
- projection lens
5. Remove the foam parts
6. Open the inner cardboard box
7. Remove the foam parts
8. Lift the projector out of the inner cardboard box
8
R59770198 BARCO SIM 7D 13/02/2013
To Next Page
Loading...
