7. Advanced
Image 7-147
How to perform the GLD correction?
1. Use the arrows to select the Hierarchy level and confirm by pressing ENTER
Image 7-148
Warning: To perform GLD correction, you must st
art at Hierarchy level 1, then go to leve l 2, then level 3 to end at level 4.
2. Highlight Adjust and confirm by pressing Enter to open the alignment user interface
Image 7-149
3. In the alignment user interface, highlight the edit box in the Level section.
4. Use the arrows ← or → to select the range to be adjusted
Warning: To perform GLD correction, you must start at the lowest range and go though all ranges to end w ith the highest range.
136
R59770198 BARCO SIM 7D 13/02/2013
To Next Page
Loading...
