A. NVG option
1. First phase (TOD value is increased from 100 on): CCD is moving to higher transmission until is has reached full transmission
2. Second phase (TOD value is increased until 1000): ECR is moving to full transmission
3. Third phase (TOD is set to 1001):
- NVG filter moves out of the light path
- ECR returns to its minimum, being 40%
- CCD returns to the position that meets the TOD setting of 1001
- CLO-TOD tracking Dynacolor set is enabled
4. Fourth phase (TOD value is further increased): CCD is moving to higher transmission until is has reached full transmission
5. Fifth phase (TOD value is further increased to 10000): ECR is moving to full transmission
168
R59770198 BARCO SIM 7D 13/02/2013
To Next Page
Loading...
Need help?
General
