Field Description
Possible values for Option:
• * (default value): Enter the IP address of the
time server to be sent to the client.
• 5) : Enter the IP address of the DNS server to be
sent to the client.
• 5) 5 ): Enter the DNS domain to be sent to the
client.
• 2)/):) : Enter the IP address of the WINS/
NBNS server to be sent to the client.
• 2)/):* ) *(+: Select the type of the WINS/NBT
node to be sent to the client.
• *<* : Enter the IP address of the TFTP server to be
sent to the client.
• 6323 611: Enter the IP address of the CAPWAP
controller to be sent to the client.
• .A0 +# !: This option enables you to
send a client any URL.
Use this option to send querying IP1x0 telephones the URL of
the provisioning server if the telephones are to be provisioned
automatically. The URL then needs to take the form
+8//B $ +#
C/#=+.
• E + (Vendor Specific Information): This enables
you to send the client any manufacturer-specific information in
any text string.
• E #: With this option, the configuration paramet-
ers (e. g. PIN and the SIM card´s access point name (APN))
can be transferable.
Several entries are possible. Add additional entries with the
Add button.
Vendor Group
In the Local Services->DHCP Server ->DHCP Configuration->Advanced Settings
menu you can edit an entry in the DHCP Options field, if Option = E + is se-
lected.
bintec elmeg GmbH
17 Local Services
bintec RS Series 461
To Next Page
Loading...
