Bosch Rexroth Tightening System 350 - Symbols and Representations

12/641 Bosch Rexroth AG | Tightening Technology 3 608 878 300
System 350 | 3 608 878 300/2019-03
The safety instructions describe the following types of risk. The type of risk describes the risk if the
corresponding safety instruction is not observed. The signal words have the following meanings:
1.4.2 Symbols and representations
DANGER
Death or serious bodily harm will result.
WARNING
Death or serious bodily harm may result.
CAUTION
Bodily harm or damage to equipment may result.
NOTICE
Damage to equipment may result.
If this information is not observed, the operating procedure may be impaired.
Table 1–2: Symbols and representations used in the documentation
Symbol Explanation

Prerequisite
Ensure that the stipulated prerequisite is met before proceeding to the next step.

Step
This symbol indicates an individual step.
1.
2.
3.
Sequence of steps
Take the steps specified while following the order specified.

Result
This symbol indicates the result of a step.
Example Examples are in a gray field and illustrate the previously stated information.
A tip provides additional information that is not decisive for working with the tightening system, but
is important and useful.
Blue text References to other sections are shown in blue. Click the reference in the PDF to jump directly to
the referenced target.
Bold text Special text is shown in bold. This includes operating elements, screen displays, or important text
passages.
<n> Angled brackets mark a variable value that you need to replace with a specific value in the respective
case.