Bosch Rexroth Tightening System 350 - Result Reset (Resrs) before Tightening Process; End; Ergospin

3 608 878 300 Tightening Technology | Bosch Rexroth AG 185/641
System 350 | 3 608 878 300/2019-03
5.6.15 Result reset (ResRs) before tightening process end
(1) Input, (2) Output
Result signals are not set to "low" (e.g. TorqH, TorqL, AnglH). The OK, NOK, and CyCmp signals
maintain their status.
5.6.16 Tightening with NokAc using the tool button on ErgoSpin
(1) Input, (2) Output
(a) Start button
(b) Cw/Ccw reversal switch set to
Cw
(c) Tool Button