Bosch Rexroth Tightening System 350 - Overview of the tightening results communication

196/641 Bosch Rexroth AG | Tightening Technology 3 608 878 300
System 350 | 3 608 878 300/2019-03
6.1 Overview of the tightening results communication
Fig. 6–1: Possibilities for tightening data output
A CF card (CF350) is required for the following data output:
FTP option "after process end (CyCmp)", as well as for protocols PFCS, PFCS 2-Port, IPM, Open
Protocol, VW-XML 2.x, PLUS and QDA
Type CS351x-D NK compact systems that can only be operated as slave of a modular system (as of
version V2.200 of the Rexroth Tightening System 350) do not have any data services. Instead, these
functions are integrated into the communication unit (KE) of the modular system.
(1) Laptop (3) Data archive/mass storage
(2) Printer (4) Partner controller
(4)
PLC
(3)
(2)
(1)
If during the tightening data output, you switch off the Rexroth tightening system 350 or the entire system,
data might get lost.
 Only switch off the Rexroth tightening system 350 or the entire system after the tightening data
output is complete in order to avoid data loss.