Bosch Rexroth Tightening System 350 - Communication between the Tightening System and the BS350 Operating System

3 608 878 300 Tightening Technology | Bosch Rexroth AG 57/641
System 350 | 3 608 878 300/2019-03
Fig. 3–17: Modular system communication options
3.5.3 Communication between the tightening system and the BS350 operating system
Communication between the tightening system and the BS350 operating system can take place via USB
or Ethernet (see preceding figures). The BS350 is used to program tightening jobs and to visualize and
analyze measurement values.
For an Ethernet connection, the PC must be equipped with a network card. For the connection via USB,
a corresponding supplied driver must be installed on the PC.
Field bus
Internal bus
Tightening cell
TCP/IP
Printer / scanner
Serial coupling
- RS232
- RS422
- 20 mA
PC / Laptop
WLAN
Access
Point
Results